• Rider backrest
• Removable and fully adjustable, folds down into the seat, and comes with a 9"x6" detachable storage pouch with zipper and rain flap.

#14200 - Rider backrest with pouch

plain - $225

#14201 - Rider backrest with pouch

studs - $235

or call 877.672.0288
to order

• Your stock passenger seat will fit with our new rider seat and your stock rider seat will fit with our new passenger seat.
• Our MIDRIDER is designed so you sit in the seat, not on the seat.
• The Roadstar MIDRIDER is 17 inches wide and will sit you at the same height as your stock seat.
• Rider backrest, removable and fold down
• For the Midrider seat we have designed a new removable, fully adjustable, fold down rider backrest that is mounted in the front of passenger seat.
• Therefore, to have our rider backrest you will need our passenger seat on your bike as the passenger seat has the rider backrest mounting hardware built into it.
• All Road Star passenger seats have the rider backrest bracket built in so you can add the rider backrest anytime.
  
• Ultimate removable rider backrest
  - Pad measures 7" high by 10" wide by 1.5" thick and is built using the same   memory foam as our seats.
  - Infinite tilt to match your back angle.
  - Folds down forward for easy on and off your motorcycle.
  - Adjustment forward and back is more than 2 inches.
  - Adjusts with a thumb screw while your riding.
  - No need to remove the seat or use a wrench.
  - Includes zipper storage pouch that velcros to the back of the backrest.
  

• The Ultimate passenger seat is 14 inches wide with comfort to spare and fits with all passenger backrest sissy bars.
• The Ultimate passenger backrest pad for the tall bar measures 7 1/2" wide x 10" high x 2 1/2" thick with two height adjustments to fit your passenger just right. This helps eliminate back fatigue on those long rides. There is also a large pad available for the tall bar. It measures 12" wide by 8" high.
• The Ultimate passenger backrest pad for the short bar measures 10" wide x 7" high.
• Our passenger backrest pad bolts right on to your Yamaha sissy bar.
• The passenger backrest pad comes with stainless steel screws and fits on your stock Yamaha sissy bar, other make sissy bar pads also available.
• All seats shown on our web site and pricing is our premium Vinyl.

Our standard logo embroidery is the "STAR ultimate" in silver/gray (included)

Our standard stitching color is black.

Other embroidered Logo and stitching colors are available.

Water resistant but not waterproof

Most motorcycle seats are built with a sheet of plastic between the seat cover and the foam, this is to prevent the water from going through the cover stitching into the foam.
However, the sheet of plastic tends to holds all the heat in the seat cover so we do not use this method.
Our seats will disperse the seat cover heat through the foam and your butt will have a cooler ride.
The trade off for this is our Ultimate seats are not completely waterproof.
A Vinyl seat will let water in through the stitching and Leather will do the same and also soak through the hide if it gets really wet.
A rain cover should be used to prevent water from seeping through the stitches into the comfort foam.

We recommend you always cover your seats with our Ride-on waterproof cover when sitting or riding in the rain.

Our covers will also protect your seats from the suns damaging rays.