| Each
model VTX bike have very different stock seats from Honda.
The Ultimate replacement seats have been designed and
styled separately for each VTX model also.
For instance, do not compare an Ultimate Lowrider or Bigboy seat
on a 1800 Retro if you have a 1800 C model, the seats are very
different for each bike model.
All
Ultimate seats are designed with your ultimate comfort as the
first priority Our design expertise guaranties to give you a long
distance no numbum ride with our exclusive comfort memory foam
(our secret). Correct nose angle design prevents you sliding forward,
you sit in our seat not on it.
It
feels like your butt has gone to heaven
Now you can have the ride
you have been waiting for.
Our
new seats are so good we offer you a 14 day trial period. If after
riding on our seat you don't agree for any reason you can return
it for a full refund.
Click
here for our 14 day trial ride return policy...
No
one seat can be made to fit all size riders. This is why we build
a Lowrider seat and a Midrider seat and a Bigboy seat for the
different VTX model bikes.
Which
seat suits you best depends on your height, weight, leg length
and the size of your butt.
Because
our seats have a built-in back support, the heavier
you are the more forward you will sit.
Call
us to check which seat model is best for your measurements.
Lowrider:
The 1300 model Lowriders and Midriders are
16 inches wide and the 1800 model Lowriders are 17 inches wide
All Ultimate Lowrider model seats are one inch
lower than your stock seat.If you are under 200 lbs you will sit
in the same position or a little closer to the handle bars as
your stock seat depending on your butt size. If you are over 200
lbs you will sit one inch or more forward. If your not wanting
to sit more forward you may need our Midrider or Bigboy model.
Midrider:
The 1300 C and 1800 F model Midriders are
16 inches wide and will sit you at the same height and the same
position to the handlebars as your stock seats.
Bigboy:
If you are heavier than 220 lbs. you may
need the Bigboy model (1300 Retro and
1800 Retro and 1800 C)
The Ultimate Bigboy model seat is designed for
riders over 6 ft tall and or heavier than 220 lbs.
The Bigboy seat for the 1300 Retro and 1800 C model is 17 1/2
inches wide and the 1800 Retro Bigboy is 18 inches wide.
The
Bigboy seats are one inch higher than your stock seat and will
sit you further back (depending on your weight and butt size)
This also helps riders with leg inseam measurements over 33 inches.
All
Ultimate seats for VTX models have the rider backrest hardware
built into every seat so you can add the backrest at any time
(except 1800 F Midrider)
Ultimate
removable rider backrest
- Pad measures 7" high by 10" wide by 1.5" thick
and is built using the same memory foam as our seats.
- Infinite
tilt to match your back angle.
- Folds down forward for easy on and off your motorcycle.
- Adjustment forward and back is more than 2 inches.
- Adjusts with a thumb screw while your riding.
- No need to remove the seat or use a wrench.
The
Ultimate VTX passenger seat is 14 inches wide for all
models with comfort to spare and the sissy bar backrest pad will
bolt right on to your Honda backrest sissy bar or other aftermarket
bars (we make them all)
The
Ultimate passenger backrest pad measures 12"
wide x 8" high and sits your passenger 10 degrees straighter
than the stock pad, this helps eliminate back fatigue on those
long rides. The pad comes with stainless steel screws and fits
on your Standard or Deluxe Hondaline sissy bar or any other make
bar.
All
VTX model Ultimate seats are offered as individual components
and as sets.
You can have your choice of our premium Vinyl or Leather.
Water
resistant but not Waterproof.
Most
motorcycle seats are built with a sheet of plastic between the
seat cover and the foam, this is to prevent water from going through
the cover stitching into the foam.
However, the sheet of plastic holds all the heat in the seat cover
so we do not build our seats useing this method.
Our seats will disperse the seat cover heat through the
foam and your butt will have a cooler ride.
The trade off for this is our Ultimate seats, both Vinyl or Leather
are not waterproof.
A Vinyl seat will let water in through the stitching and Leather
will do the same and also soak through the hide if it gets really
wet.
A rain cover should be used to prevent water from seeping through
the stitches into the memory foam.
We
recommend you always cover your seats with our Ride-on
waterproof cover when sitting or riding in the rain.
Our
cover will also protect your seat from the suns damaging rays.
All pictures shown on our web site
are Vinyl and in US dollars.
|
