Comfort,
as in no numb bum after an hour or two of riding
The
perfect riding position for all size riders, Lowrider, Bigboy
and King.
The
correct nose angle to prevent you sliding forward when on the
brakes and also prevents the passenger sliding
into the back of the rider.
You sit in our seat not
on it
|
I
designed three different seats to be able to fit all the different
shapes and sizes of riders.
First came the Lowrider model which suits riders
up to 200 lbs and under 5' 11" tall.
Then
the Bigboy model for riders 6 ft or more and over 200 lbs.
Finally
the King Bigboy model for riders over 6' 3" and or over 270
lbs and also those with long legs over 34" inseam. |
|
|
So
here we are now with the
Ultimate Seat that's right for all you Valk riders that need the
ultimate in comfort and function.
Thanks
for visiting and we look forward to providing you with the Ultimate
seat for your total comfort and enjoyment. |
See
you in the wind.......and
enjoy
the ride again
Des
No
one size seat can be made to fit all size riders. This is why we
build a Lowrider seat a Bigboy and a King Bigboy seat. Which seat
suits you best depends on your height, weight and leg length.
Because
our seats have a built-in back support, the heavier you are the
more forward you will sit. |
If
you're under 5 '11" tall and less than 200 lbs and want to
sit one inch lower than your stock seat then the Lowrider is for
you.
If
you're 6 feet or more and or over 200 lbs you need our Bigboy seat.
If
you're leg inseam measures more than 33 inches you need the Bigboy
seat.
If
you're 270 lbs or more or taller than 6ft 4 inches or have a leg
inseam longer than 34 inches you need our King Bigboy.
|
Water
resistant but not waterproof
Most
motorcycle seats are built with a sheet of plastic between the
seat cover and the foam, this is to prevent the water from going
through the cover stitching into the foam.
However, the sheet of plastic tends to holds all the heat in the
seat cover so we do not use this method.
Our seats will disperse the seat cover heat through the
foam and your butt will have a cooler ride.
The trade off for this is our Ultimate seats, both Vinyl or Leather
are not waterproof.
A Vinyl seat will let water in through the stitching and Leather
will do the same and also soak through the hide if it gets really
wet.
A rain cover should be used to prevent water from seeping through
the stitches into the comfort foam.
We
recommend you always cover your seats with our Ride-on waterproof
cover when sitting or riding in the rain.
Our
cover will also protect your seat from the suns damaging rays.
|
Leather
Versus Vinyl.
If
you choose leather, we use the finest Scottish hides and cover
the entire seat set (not just the sitting area).
However, in my opinion, there are no advantages
with a leather seat.
Most people cannot visually tell the difference between our premium
Vinyl and Leather unless they are side by side and then it needs
to be pointed out which is which. Leather
or Vinyl does not breathe except through the stitching.
Neither seats, Vinyl or Leather are waterproof.
A Vinyl seat will let water in through the stitching and Leather
will do the same and also soak through the hide if it gets really
wet.
Durability is similar but our premium Vinyl will hold its shape
and new look longer than Leather.
I
recommend you always cover your seats with our Ride-on
waterproof cover when sitting or riding in the rain.
I believe a Vinyl seat is the best overall value.
Enjoy the ride again
Des
|
All
seats shown on our web site are our premium Vinyl
All
prices are in US funds
|
